Wednesday, 3 October 2018

Japanese Airfields, Equipment & stuff #5

Tail wheel towbars & draggers
It seems that Kawasaki, at least in their central factories used a certain type of tail wheel towbar found on a Kawasaki Ki-100 and a Kawasaki Ki-45 "Toryu" prototype. I haven't spotted it in any combat unit photos so I don't think it was really common.
 
 
 
 
On the other hand the tail wheel dragger was extremely common with types without tail wheels like the "Nate" or with types with more delicate ones like the trainers Tachikawa Ki-9 "Akatonbo" and Tachikawa Ki-55 "Ida". Not uncommon with "Hayabusa" too or other combat types with the tail wheels damaged, for example, during hard landings. The metal frame was pretty standard but the wheels were not. I don't know if there was a certain manufacturer that built these for the Army but I suspect the crew used whatever spare wheels were around. For years I was trying to figure out what was inside the "pot" where the tail wheel rested since in all photos the wheel is already in, until I finally discovered the bottom photo; nothing. The wheel was simply placed inside the empty "pot" and that's it.
 
 
 
 
Buckets and pots
The ground crews used various buckets to bring liquids near the maintained aircraft. Most often they contained water to wash the dirt off the wheels or other parts of the plane. 
The bucket below is called "teoke" in Japanese and is made of wood. It is a more traditional way to carry water, now seen only in Budhist temples when, during Obon, the Japanese visit the graves of their ancestor and clean them using water carried in these buckets available at the temple. In time the teoke became darker in color. Note the guy in the photo below is using a teoke and a brush to wash the wheels of a "Lilly". Note also the metal ladder described in a previous posting.
 


 
 
 
 
 
 
 
 
 
 
 
The most common bucket though is the one seen below made of metal. The writing, whenever there was one, either said "防火用バケツ" (bokayo baketsu - bucket with water for extinguishing fires) or the name of the unit that used it.
 
 
 
 
Another means to transport water or other liquids like lubricating oil was with old tall metal boxes with the top removed and either two holes on the sides and a piece of rope as handle or a piece of wood running the length of the open top, again to use as a handle.
The two boxes at the top say "bokayo baketsu" the one lower says "3rd shotai".
 
 
Finally there was a short open pot called "kanadarai" used to wash clothes by hand and can be seen in the photo below. It could be with short handles or without.
 
 
 
Other stuff
If you want to make your base or diorama even more interesting you can use various stuff lying around on a Japanese airfield, like:
an old propeller (note the bucket) left or a propeller bent after an emergency landing 
 
 
 
 
a flat tire that has been changed and is lying around waiting to be brought back to the workshop to be repaired
 
spare oxygen cylinders but check if your aircraft type had them; in the case below it's a 244 Sentai "Hien"
 
 
spare drop tanks
 
a bottle of something
 
metal containers similar to those found in garages all over the world
 
or simply various stuff like ladders, boards and what-have-you set aside after the plane has been maintained 

Tuesday, 2 October 2018

Japanese Avaition SIG NEWS - St. Ives Show

A special thanks to Richard Brooker, Dick Delaney, Peter James, Peter Terry and Glenn Wilson for making our display such a good one. Ian Christmas, Julian Dixon, John Drummond, Jack Lassiter, Lawrence Paffett and Mike Starmer were there too. There's nothing like moral support!
 
It was a really good show, lots of activity, good vendors and displays in abundance giving us food for thought. 
 
I'll be taking the SIG to Belgium this weekend to support IPMS Belgium in their 50th anniversary celebration. If you are attending and would like to display, let me know. I'll be taking 1/32 models.
 
Apart from Belgium our next show is Scale ModelWorld at Telford. I hope to see you there.
 
- Gary Wenko -

Monday, 1 October 2018

Japanese Aircraft Online Model Contest 009 - George Eleftheriou #4

Before you say that all the models I submitted are boring two-toned, here's my quickly finished Nichimo "Sonia" in 1/48. As before, I could continue working to improve the model for a few more hours but wanted to finish it ASAP and don't miss today's sunshine after last night's typhoon.
A few words about the unit first.
 
The 64th Shimbu-tai a.k.a "Kokka-tai" (National Flowers) was organized on April 1, 1945 at Hokkota and was equipped with Mitsubishi Ki-51 "Sonia". On May 26 the commander of Hokkota Kyodo Hikoshidan MajGen Imanishi Rokuro named the unit during the send-off ceremony. The tail marking was designed by schoolgirls of a high school near Haranomachi airfield. The arrow was chosen as it goes in only one direction and never returns and the cherry blossoms as the classic symbol of shimbu-tai pilots. 
After flying to Taisho airfield in Osaka, the unit continued to Metabaru airfield, Saga Prefecture. On June 9 advanced to Bansei airfield, Kagoshima Prefecture, and two days later took off on their last mission. The 1st shotai with four aircraft and the 2nd shotai with three attacked ships in Nakaji Bay, Okinawa while the 3rd shotai (exact number of a/c unknown) attacked ships around Kadena. They  were accompanied by one "Hayabusa" from the 44th Shimbu-tai and one "Nate" from the 215 Shimbu-tai. All in all nine members of the 64th perished in suicide attacks.
 
About the model.
I encountered a number of issues. Fitting was overall very good except for the landing gear the pieces of which just didn't want to fit smoothly. I replaced the terrible exhausts with tubes cut from cotton swabs. The tail wheel also sucked and I replaced the main rod. The major issue was the two landing lights in the middle of each wing. Nichimo didn't offer anything there so I decided to cut the area, fill it with styrene, add a small piece of extra plastic sometimes found on the end of a piece on a kit tree, which had exactly the shape of a light and then struggle with the transparent cover. Initially I tried plastic warmed and shaped in hot water but gluing it caused a mess. Kiri had the idea to use clear sticker film and it worked as a charm. This was done after the camo was applied so it didn't end up as nice as I would have liked but couldn't do much without ruining the camo. 
The camo. There are two photos showing the "Sonia" of this unit, found on p. 146 & 147 of MA#451. There is also artwork done by Nohara Shigeru.
 And artwork found in the Create 301 (Aeromaster?) "Special Attack Squadrons" (1996) set which shows a different camouflage pattern.
 A close up of the p.146 photo shows the plane in the foreground with a difficult to discern camo pattern and the plane right behind in a madara (spots, mottled) camo pattern.
 Just when I decided to do that plane and started painting the camo I discovered on-line a better quality version of the photo.
It seems the plane in the foreground is in a light overall color (light brown or MrColor #304) but the plane behind it has definitely darker (dark green) blotches.
My first try to recreate the camo was with stripes of blue tack and it just didn't look as good as I would have liked. Instead a made a rough outline with a soft pencil directly on the model then went free hand with the airbrush in very low pressure. Naturally there was a halo around each blotch but after a few passes with a very very fine nail file the excess halo was gone. I hope you like the result.
Another area was the bomb attachment. There are no clear photos but according to sources the tokko "Sonia" had their under-fuselage windows filled and since there is no hard attachment point on "Sonia's" belly, a sheet of metal was attached, most probably welded to the main spars. I made some logical assumptions (the sheet must cover the windows without being too wide, too narrow or too thick) and the result is not bad at all. I used a spare 250kg bomb and attachment points from a Hasegawa "Hayate" kit. I didn't use the wing guns as these were removed from the tokko "Sonia" to save weight. I kept the rear machine gun though as a means of in-flight protection.
As always I used Mr. Color paints, Mr.Color #128 for the overall, Mr.Color #16 for the camo.
Now that I know the difficulties of the kit I will definitely build more "Sonias"; waiting for the new kit by Wingsy!