Here's my entry for the contest. Tamiya in 1/48.
I would like to say a few words about this kit and the challenges it presented from a beginner modeler's perspective like the one I am. I wouldn't normally bother with an old kit (like I did
here) but since Tamiya decided to re-issue the same old crap with their beautiful
Kurogane and modelers still struggle with it, I feel a detailed review is in order.
"Wind Sword" and "Toryu" already commented that it's a 1/50 (at least some parts) kit with most panel lines raised and only a few (the wing cannon access panels and around the cowling) engraved. The fit is okay at most places except for the wing root area. Any effort to fix the gaps will probably result in loosing the raised panel lines. I used fuselage halves from 2 different kits and they didn't fit exactly resulting in more sanding and more raised panel lines lost.
The cockpit is very basic. The application of the decal set for the instrument panel was bizarre. Tamiya instructions call for the decal to be cut in two and then applied to each fuselage half.
No reason to do that. Just cut the decal in the shape of the instrument panel, (don't remove the decal in water, leave it on the paper) and stick it directly on one fuselage half .
But the worst of all is the canopy which is given in 3 separate pieces. The front and middle fit okay but the rear is a joke and the result is a very weird looking canopy. Choosing to have the canopy open will result in showing the poor cockpit. I checked various on-line videos showing canopy masking techniques and tried a couple, especially the "masking tape - mechanical pencil - cut masking tape to shape" but nothing worked due to very shallow canopy frame lines. I opted for gradually masking one frame line at a time for the middle and rear parts and toothpick for the front. The masking worked well, the toothpick less so, again due to shallow frame lines.
The landing gear is not bad but the wheel covers are way too thick and trimmed mine to satisfaction. I used stretched sprue for the break line; I should have used fishing line which is more flexible to curve. Didn't bother to follow the instruction to glue the landing gear in the "correct angle".
The wing cannons and pitot tube are really silly but a minor frustration.
The decal set now.
Depending on the age of the particular kit you may get hinomaru in different reds. In the old set above their more bright red, in the newer set below (the ones I used on my model) they are much darker. In my opinion neither shades of red are satisfying.
The Tamiya decals (even the new ones) and the old "Aeromaster" and "Super Scale" (more below) give
hinomaru surrounded by white squares. Check
here why this is inaccurate. In any case the Tamiya
hinomaru decals I used are too thick, that's why the radio access panel on the port side of the fuselage is not visible.
As you can see the Tamiya decal set does not help with the various red or white lines on the wings of the Hayate. I used the ones provided by the "Aeromaster" set which was designed for the Tamiya kit although they are not complete (various panel lines are missing) and I ended up having different yellow for the IFF stripes (which I painted) and different for the panels. Furthermore, one part of the radio line is connected to the fuselage right where the starboard hinomaru is. So you will have to pierce the decal and pass the line through. I forgot this detail and didn't want to risk ruining the decal, so the line was wrongly placed on the fuselage beyond the hinomaru.
The propeller is another area where the decal set is a let-down. Tamiya provides decals for only the interior yellow marks. I painted the rest of the yellow lines but I ended up with different yellows. The instructions call for the rear of the propeller blades to be painted red brown. AFAIK the propeller blades were green front and back. Hasegawa recommends MrColor #319.
I didn't have this paint around so I lightened up MrColor #129 (Dark Green Nakajima). I'm not at all unhappy with the result.
I painted my model using Hasegawa's instructions, top MrColor #304, bottom MrColor #128.
The antiglare is MrColor #125.
I painted the cockpit with MrColor #130.
I'm happy with the result and the cockpit interior is barely visible so I won't lose any sleep if the color is not accurate. I did the wheel wells silver. In all the photos they look bright, so definitely not
aotake. They could be the same with the wing underside color or maybe not.
Markings.
I wanted to do the "90" "
Hayate" of the 102
Sentai as seen in the photo
HERE. There are no decals for this specific aircraft in 1/48. Lifelike in their first "
Hayate" set do give 102
Sentai tail marking with red over white surround. The white surround could be used but then you will have to find a number "90" from somewhere else. Also it is doubtful the decals would fit the Tamiya kit and I don't see any reason to waste such fine decals on the Tamiya kit; better to be put them to use with the Hasegawa kit. And so, for the very first time, I decided to paint and mask the tail marking. I printed the photo, D. Chouinard sent over artwork but somehow the correct shape of the tail marking with the pointy rear ends didn't register in my head and instead I did the "official" version. I found number "90" decals from the old Nichimo IJAAF "
Akatonbo" kit in 1/48 but were too thin and the white "90" doesn't stand out as it should. So, I'm fairly happy with my first homemade tail markings but, damn, I screwed up the correct shape. That should teach me not to work on 6 different "
Hayate" model projects and an article at the same time.
