Jan Kaňov from Czech Republic send over WIP photos of his Tamiya Kawanishi N1K1 Kyofu Type 11 in 1:48. Accessories from Eduard in the form of a set of metal parts 48 269 (Eduard 1998).
WIP Pt. 1
Drilled engine cowling with new shaft and rim.
Assembled and sealed float of the airplane and a few other parts too. Also drilled the cowling gills on the port side of the fuselage.
New engine cowling flaps
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgsQJ7bouAkPpi6Sf4gmBnjUoxo0HKn_gbp8et4xB9dtVVpV19SWxxFbKn909ajdfBUpTC116CLRO2x0jWpWE9pjEopj1Meyav902OC5XbLd1zIG64lAGsM9CDKDyFthTz9WLVB5BnqWHQ/s200/JanKanovKyofu5.jpg)
The basis for new exhaust ducts. The exhausts can be attached to glued sticks after the model's overall paint.
WIP Pt. 2
Dummy of exhaust ducts. Ready to glue the fuselage. I did not shoot the engine, it will not be seen! ;)
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhAHwd3sX7y0PHl9hNwfiKy51EBqrmu5mnums4viKSvgLo23PUchfco7LooiH5tHbAd_WSjjGu4cHrgyVXU-68RiOwfK0F_mxljk1Dqr3Ky7DdXqL5eFSdpEgkBnsgqy7SIaqVze3Mc-hM/s200/JanKanovKyofu10.jpg)
Closing the cartridge ejection shaft. I
further separated the control wings and the flaps.
![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiqLmc_qkZAekH4wk8qWDMpK0wtP79YKQr2IiMOeegh5M01wBqwJsO5CsuO8vH9fgPnka63fjyBh1TRD8b5Spre2aShRuv5z-3QpTmONWqe2MMZ6JAuo-FkkBqHQkA-HKS1u-nj3h2SnX8/s200/JanKanovKyofu12.jpg)
After clutching the hull, I separated the
directional rudder. There is a newly created position for the rudder on
the photo.
Modified directional rudder.
Final appearance.
No comments:
Post a Comment